picture not shown             

#10 Screws Wood Grips

Use to fasten the metal decking(panels) to wood framing (structure).

Size Avaliable: #10-1 1/2" with 1/4" Hex Head Includes neoprene washer Color matched head available


TEK #12 screws"Self Driller"

Use to fasten the metal decking (panels) to metal framing.

Size Available: #12- 1 1/4" with 5/16" Hex Head Includes neoprene washer Color matched head available


#12 Strapping Screw

Use to fasten strapping to framing

Size Available: #12-3/4" with 5/16" Hex Head Plated (Galvalume) color only


TEK 4.5 #12 Screw W/Washer

Use to fasten material to heavy framing

Size Available: #12-1 1/4" with 5/16" Hex Head With washer Color matched head available


TEK 4.5 #12 Screw NO WASHER

Use to fasten material to heavy framing

Size Available: #12-1 1/4" with 5/16" Hex Head No washer Color matched head available


#10 Flat Head "Wood Grip"

Use to fasten metal decking (panels) to wood framing (structure)

Size Available: #10-1" Gimlet Point Flat (Square Drive-Type A) Wood Grip


#10 Flat Head "Metal Driller"

Use to fasten metal decking (panels) to wood framing(structure)

Size Available: #10-1" Self Driller Flat(Square Drive-Metal Driller)


ZAC #14 Screws

Use to fasten ("stitch") metal decking (panels) together where the major (high) ribs lap each other

Size Available: #14-7/8" with 3/8" Hex Head Includes concealed neoprene washer Color matched head available


ZAC #12 Screws "Self Driller"

Use to fasten the metal decking (panels) to metal framing

Size Available: #12-1 1/4" with 3/8" Hex Head Includes concealed neoprene washer Color matched head available


Fin Head Bolt

Use to fasten when you need the bolt to be flush with surface

Size Available: 1/2" x1" Fin head bolt & nut Plated (Galvalume) color only


A307 Bolt & Nut

Use to fasten to fasten purlins & girts at the laps

Size Available: 1/2" x 1 1/4" hex head bolt & nut Plated (Galvalume) color only


A325 Bolt & Nut

Structural framing bolt and nut

Sizes available as listed below: Black color only

•1/2" x 1 1/4" | •5/8" x 2"| •3/4" x 2 1/2"
•1/2" x 1 1/2" | •3/4" x 1 3/4" | •3/4" x 2 3/4"
•5/8" x 1 1/2" | •3/4" x 2" | •7/8" x 2 1/4"
•5/8" x 1 3/4" | •3/4" x 2 1/4" | •7/8" x 2 3/4"


Anchor Bolt & Nut

Foundation bolt and nut for structural framing

"L" shaped bolt with nut

Structural Washer sold separately

sizes available as listed below: Black color only

•1/2" x 8" | •3/4" x 15" | •7/8" x 18"
•5/8" x 12" | •3/4" x 18" | •1" x 24"
•3/4" x 24"


Structural Washer

Structural washer for anchor (foundation) bolts for structural framing

Sizes available as listed below: Black color only

•1/2" ø | •1/2"ø | •5/8"ø | •3/4"ø | •7/8"ø | •1"ø


Wedge Anchor

use to fasten door framing to the foundation of the building

Drive Pin bolt with nut and washer Sizes available as listed below:

•1/4" x 2 1/4" | •1/2" x 2 3/4" | •5/8" x 6" | •3/4" x 5 1/2"


Nail Anchor

use to fasten material to concrete block or masonry material

sizes Available: 1/4" x 1 1/4" Drive pin Plated (Galvalume) color only


Wind Bracing Cable

Cable used to transfer wind load across framing

Zinc-coated steel wire strands ( E. H. S.) Sizes availabe as listed below: Plated (Galvalume) color only

•1/4"ø | •5/16"ø | •3/8"ø | •1"ø


EyeBolt & Assembly

Hardware used to attach wind bracing cables to framing

Eyebolt, nut, washer, and hillside washer sizes available as listed below: Zinc Plated (Galvalume) color only

•1/2"ø | •5/8"ø | •3/4"ø | •1"ø


Cable Grips

End wraps for wind bracing cable

Sizes available as listed below: Zinc plated (Galvalume) color only

•1/4"ø | •5/16"ø | •3/8"ø | •1/2"ø


  

Contact Information

  Phone: 901-365-6900 or Toll Free 1-800-886-6257
  Email: Component Sales   General Information   Customer Service
  Address: 3861 Old Getwell Rd, Memphis,TN 38118
  Office Hours: Mon-Fri 8:00am-5:00pm CST